How to Repair a Door Lock? 

There are many moving parts to a door lock, and if something goes wrong, you may need to hire a locksmith. If you are not comfortable with DIY projects, you may want to seek assistance from a locksmith. The following steps will guide you through the process of repairing a door lock. 

(Looking for a locksmith? Contact us today!)

Repairing a door lock is a complex process 

There are many reasons why a door lock may become jammed. Regardless of the cause, it is imperative to repair it as soon as possible. Ignoring the problem could result in further damage. Fortunately, there are some simple DIY door lock repair tools you can use to get the job done quickly. 

Firstly, you must unscrew the knob. This involves loosening the base set screw and unscrewing it from the spindle. Once the spindle is removed, you can replace the knob. Be sure to carefully unscrew the knob’s spindle by pressing down on the base of the knob. Do not damage the backing plate or you could ruin the entire lock. 

There are many moving parts 

Firstly, the lock mechanism must be removed from the door. This can be done by loosening a set screw that is located on the jamb side of the lockbox. Next, you should unscrew the thumb turn from the door. You should then remove the door knob. If the door knob is attached to a mortise lockbox, then remove this screw. 

The cotter pin is one of the most important parts of a door lock. When a key is entered, it causes a force on the cotter pin that turns the rotor. A spring is also present and adds to this pressure. Another important component is the stator. This is what allows the rotor to turn when the key aligns with grooves. 

You may need a key extractor 

If you have lost or broken a key, you may need a key extractor to repair the lock. The tool is usually made of metal, and is useful for repairing door locks. It hooks onto the key’s teeth and pulls it out. Alternatively, you can use a pair of needle nose pliers to gently push the blade into the keyhole. If this method does not work, you can use a strong magnet to pull the broken pieces out of the lock. 

Broken key extractor kits come in different shapes and sizes, and are usually inexpensive. Each tool is designed to fit specific types of locks. The key extractor tool slips into the lock cylinder and pulls the broken piece out. 

You may need a locksmith 

If your door lock is acting up or not working properly, you may need to call a locksmith for help. There may be resistance when you turn the key, or it could have broken internal components. You may also notice that there are problems with the appearance of the knob. Either way, you should call a locksmith right away to repair the lock. 

The first problem could be a broken bolt or latch. You may need to replace the bolt or repair the latch. Some homeowners try to fix this on their own, but this may only make the problem worse. Also, bending a bolt too far can make it brittle, so hiring a locksmith is the best way to go.