How to Repair Door Lock on Car? 

The door lock on your car is essential for both comfort and security, so when you encounter a problem with this system, it’s important to get it repaired quickly. The process of repairing your door lock can be complicated, however, so it’s best to take it into the hands of an automotive professional. 

(Looking for power lock duplication? Contact us today!)

The first step to repairing your door lock is to determine the cause of your problem. This will help you decide which steps to take and what repairs to perform. 

Some common causes of a stuck door latch include dirt, grime, or excess moisture. These can all create blockages within the keyhole, which can prevent the door latch from functioning properly. 

Another common culprit is rust formation on the metal parts of your door lock assembly. Rust can corrode the metal parts, causing them to stick together and stop working. 

If this is the case, it may be time to replace your door lock. Once the cylinder is replaced, you should lubricate it to ensure it remains in good working order. 

Use a WD-40 or other multi-purpose spray lubricant to coat the entire door lock mechanism. This will help to remove any built-up gunk inside the cylinder and prevent it from becoming stuck in place again. Apply the lubricant to both sides of the door lock and let it sit for at least 10 minutes before trying to open it again. 

Then, try opening and closing the door several times to see if it is working correctly. If it still does not, then it is time to call in a mechanic. 

Attempting to unjam the door latch manually can be tricky, especially in older vehicles. If you are not a skilled mechanic, you may end up doing permanent damage to the cylinder or lock. 

One option is to enlist the help of a friend or family member to hold the handle in an open position while you rotate the latch. This will allow you to move the cylinder to the proper orientation without accidentally hitting or knocking it. 

A more drastic solution is to call in an auto locksmith for an inspection of the lock. A qualified technician will be able to identify any parts that are damaged or disconnected and recommend the appropriate repair. 

If the problem is with the lock mechanism itself, it will be easier to fix. For example, if the latch is jammed in a certain direction, it may be possible to rotate it back to the other direction with a screwdriver. 

While you are reassembling the lock, make sure all electrical connectors and screws are in their correct place. This will ensure that you don’t have any rattles or other issues later on. 

Once the cylinder is reassembled, you should spray some electrical cleaner on the black electrical connector that connects to it. This will help to clean the wires and make them function better. 

Once you have reattached the black electrical connector and sprayed some electrical cleaner, you should be able to put the lock actuator back into the door. Then, you can reinstall the white plastic cover to the lock and actuator assembly.